Heavy Duty Trafficable Expansion Joint Waterproofing System

Discription

Fields of application

Preparation

Neolastic Trafficable Expansion Joint Waterproofing System is a heavy duty expansion joint waterproofing system that can be flush mounted or surface mounted.

Neolastic Trafficable Expansion Joint Waterproofing System consists of a butyl rubber waterproofing membrane, EPDM compression seal and 3mm mild steel-reinforced EPDM trafficable nosings. The system is secured using Stainless Steel studs and washers.

The system is suitable across a wide range of structures such as parking decks, loading bays, roadways, basement parking structures and bridge decks. It can be laid on flat horizontal surfaces as well as slopes, horizontally to the traffic flow and where vehicles will be stationery.

Concrete surfaces must be clean and free from dust, grease, water, oil and other contaminants impairing adhesion. Edges of the joint and recess must be level. Concrete should be at least four weeks old.

Asphalt surfaces to receive Neolastic Expansion Joint System must be cleaned to provide a flat surface that is free from contaminants. Asphalt surfaces should be smooth and level across the joint.

Benefits

Typical Properties*

Dimensions and Loads

  •  Durable
  •  Non-degradable
  •  UV resistant
  •  Waterproof
  •  Trafficable
  •  Long-lasting
  •  Chemically inert
  •  Easy to install

 

​

*Properties listed are only for guidance and are not a guarantee of performance.

The profile of the Neolastic Trafficable Expansion Joint that has been installed flush is 220mm Width x 42mm Depth and will accommodate a maximum horizontal movement of 50mm and 7mm lateral movement. The surface mounted installation has a profile of 630mm Width x 42mm Height.

Health and Safety

Note

Benefits

  • Installation and use causes no “health and safety” hazards, provided that the manufacturer’s instructions are followed regarding, adhesives, sealants and chemical fixings.

 

All the materials used in the manufacture of the Neolastic Trafficable Expansion Joint System are sourced and manufactures in South Africa.

Drawings & Details

 

Drawings and details are available on request.

 

  •  Durable
  •  Non-degradable
  •  UV resistant
  •  Waterproof
  •  Trafficable
  •  Long-lasting
  •  Chemically inert
  •  Easy to install

 

ENVIRONMENTAL REQUIREMENTS

• All waste generated during this activity will be handled according to the Waste Management Plan.

• Material or containers will remain closed if not in use and must be placed in a drip tray.

• All containers will be labelled properly.

• If a paint is damaged such that it cannot be sealed or closed properly, then that container will be

removed from site. The contents can be decanted into an appropriate secondary container and labelled.

• The secondary container will be able to properly close and must be compatible with the material

being stored.

• Empty containers will be sent to the hazardous waste storage area.

• If a spillage occurs, then it will be dealt with as per the Environmental Emergency

 

 

 

© 2019 Designed By Core 2 Extreme

NEOLASTIC TRAFFICABLE EXPANSION JOINT (pTY) ltd.

70 maria street, fontainbleau, randburg 2194

po box 775, bromhoff 2154, Tel (011) 792 7519,

fax (011) 792 7549, Email info@neolastic.co.za